Sanyo PLC-XE33 Information

42

Chapter 4 Controlling the Projector

Information

This page is to display the basic information of the projector status. Click

Information on the main menu.

Items Description

Input Displays selected input and source.

System Displays selected signal system.

Signal Input signal status (Yes, No)

Screen Displays screen mode.

Lamp status

Displays lamp status with an animation. Refer to the table as shown below.

Security

Displays the security (PIN code lock) status (Yes, No)

PJ time(h)

Displays the accumulated use time of the projector.

Lamp Corres. Value(h) Displays the use time (Corresponding value) of the lamp.

Filter time(h)

Displays the accumulated use time of the filter.

Click this button to

update the information.

Indication of the lamp status

Icon display/background Status

White-Yellow/Blue Lamp on (Normal)

White-Yellow/Red Lamp on (Lamp is being used over a specified use time, replace lamp

immediately)

Gray/Blue Lamp off (Normal)

Gray/Red Lamp off (Lamp is being used over a specified use time, replace lamp

immediately)

Red/Blue with X Lamp failure (Lamp failure, check lamp condition)

Red/Red with X Lamp failure (Lamp failure and lamp is being used over a specified use

time, replace lamp immediately)

Contents

Main Compliance Federal Communications Commission Notice Safety instructions Table of contents Page Features E-Mail Alert function (+p.25) Web Management function (+p.31) SNMP Agent function (+p.29) SNMP Manager function Required operating environment for computers When operating the projector via networks, computers should meet the operating envi- ronment below. Network specifications of the projector LAN Terminal The limitation*1 of connection between the projector and hub or computer Notice Expression/Abbreviation Use of this manual Trademarks Flow of installation Page Page Setting Procedure Network configuration Connecting to the LAN line Page Network PIN code Network information Network factory default Wired LAN factory default settings Page Login the setting page of the projector [3] Display of main setting page Main setting page in the display How to use the setting page Page Initial setting Network PIN code setting PJLink and password setting What's PJLink? PJLink Notice Network configuration E-mail setting 1 2 3 E-mail setting When internal PJ power circuit is failed: Examples: Type and contents of alert mail When internal PJ temperature is too high: When PJ lamp replacement time is reached: When lamp corres. value reaches preselect use time: SNMP setting Page Page Power control and status check About projector condition Control Input System Page Image adjustment Input source PC adjustment Setting up the projector Screen setting Setting 1 Setting 2 Setting 3 Information Indication of the lamp status Page Chapter 5 Appendix Examples of connection Peer-To-Peer connection To another network Connecting the projector (PJ01) to the control computer (PC05) directly. * UTP cross cable The gateway (Router) installed in the network Connecting the projector (PJ01) to the control computer (PC05) via the gateway. Oce Gateway (Router) To another network Use of telnet Control Page Web browser setting Active Script/JavaScript enable Proxy setting Examples: OS/Browsers Page Netscape Navigator v.7.1 JavaScript Setting MAC OS X v 10.4 Safari v.3.2.1 JavaScript enable setting 1 2 3 Q&A Installation/Access Q A Q from a remote location?