PC adjustment | Sanyo PLC-XK3010 specs

Chapter 4 Controlling the Projector

PC adjustment

Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen.

Item	Description

Current mode	Displays a current mode like VGA, SVGA, XGA. SXGA, UXGA, WXGA, etc. or Mode1 - Mode10
	which are the customized mode created by using the "Mode Store" function described
	below.
Auto PC adj	Performs automatic adjustment.
Fine sync	Performs Fine Sync adjustment. (0 ~ 31)
Total dots	Adjust the number of total dots in the horizontal period.
Clamp	Adjusts the phase of the clamp.
Display area
Horizontal	Adjusts the image area horizontally.
Vertical	Adjusts the image area vertically.
Position
Horizontal	Adjusts the horizontal position of the screen.
Vertical	Adjusts the vertical position of the screen.
Reset	Resets the PC adjustments to the previous levels.
Mode Store	Stores the PC adjustment values. Select a mode no. [Mode1 - Mode10] from the
	pull-down menu.
Mode Free	Clear the PC adjustment values. Select a mode no. [Mode1 - Mode10] from the pull-
	down menu.

38

Image 38

Sanyo PLC-XK3010 owner manual PC adjustment

Contents

Wired Setting Projector Set-up and Operation Network Set-up and Operation Address ComplianceFederal Communications Commission Notice Telephone No 818998-7322 Safety instructions Table of contents Chapter Features Web Management function +p.31 Network specifications of the projector Required operating environment for computers Trademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to the LAN line Description Numerical value is a setting example Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display Setting How to use the setting Example of the setting Select an item by selecting a radio button Select items by ticking on check boxes Initial setting To 32 alphanumeric characters can be used for the password Network PIN code settingPJLink and password setting Whats PJLink? Sets Dhcp configuration ON/OFF Network configurationDisplays the selected LAN mode Mail setting Setting Smtp server and administrator address Registering and deleting E-mail addresses Option selection for sending alert mail Setting Smtp authenticationSetting POP server Option Examples Type and contents of alert mail Snmp setting Click Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkService in need Popup confirmation window About projector condition Status Description Control Input System Item Description Sound Suppresses the sound. ON, OFF Image adjustment PC adjustment Setting up the projector Screen setting Setting Sets the black out image temporarily. ON, OFF Sets the image to freeze mode. ON, OFF Items Description InformationInformation Indication of the lamp status Status Controlling the Projector Chapter Appendix To another network Examples of connectionPeer-To-Peer connection Gateway Router installed in the network Entrance hall Use the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting JavaScript Setting Netscape Navigator MAC OS X v Safari Why doesn’t the setting page appear in my web browser? How can I restrict access from the computer How can I install several projectors? Ting Why cant be turned on/off with web browser?Why am I not receiving E-mail alert messages? What is the MAC address assigned to the projector? What are the rules for IP address assignment? Can I update the firmware of the projector SO-KT8AE