Setting up the projector
Setting up the projector
Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Screen setting] or [Setting] and then set up each set- ting.
Screen setting
This function is to adjust the screen mode of the projector. The values in the text box rep- resent the current screen status.
Item | Description |
Screen | Switches the screen mode. (Normal, Full, Wide(16:9), Zoom, True, Custom) There may |
Ceiling | not be available mode depending on the input mode as shown in the table below. |
Sets the image top/bottom and left/right reversed. (ON, OFF) | |
Rear | Sets the image left/right reversed. (ON, OFF) |
Reset | Resets the Screen settings. |
Input source
Screen mode Video Computer
Normal | 4 | 4 |
Full | 4 | 4 |
Wide(16:9) | 4 | 4 |
Zoom | 4 | 4 |
True | * | 4 |
Custom | 4 | 4 |
✐The mark "4" means that the available screen mode in the selected input source system. The error message appears when selecting the disabled screen mode indi- cated with "*".
ENGLISH
39
