Sanyo PLC-XK3010 owner manual Flow of installation, Connect the LAN and set the configuration

Flow of installation

Flow of installation

To use the projector via the networks, follow the setup procedures below.

STEP 1 Connect the LAN and set the configuration.

Decide depending on the LAN environment.

➔“2. Setup Procedures” (pp.11–16).

Detailed LAN configurations need to be done with a browser later.

First, complete the Wired LAN connection between computers and projec- tors, then start browser configurations.

➔“3. Basic setting and operation” (pp.17–30).

STEP 2 Network Configuration has completed.

Follow each chapter to operate the projector.

■Operate and manage the projector ➔ “4. Controlling the projector”(pp.31-43)

➔“Power Control and status check”(p.32)

➔“Control”(p.34)

➔“PC adjustment”(p.38)

➔“Setting up the projector”(p.39)

➔“Projector information”(p.42)

ENGLISH