Setting | Sanyo PLC-XK3010 manual

Chapter 4 Controlling the Projector

Setting 1

Item	Description

Language	Sets the language display of projector's
Auto setup	on-screen display menu.
	Executes the Auto PC Adj, and Input
	Search function below according to the
	each setting after clicking Start button.
Auto PC Adj	Sets Auto PC Adjustment mode. (ON,
	OFF)
Input search	Sets the auto-input signal detection
	mode. (ON1, ON2, OFF)
Auto keystone	Sets Auto Keystone mode. (Auto, Manual,
Background	OFF)
	Sets the screen background when no signal input. (Blue, User, Black)
Display	Switches on or off the on-screen menu display on the screen. (OFF, Countdown off,
	ON)
Logo	Countdown off........Displays image during the starting up.
	Sets on or off the logo display on the screen during the startup. (OFF, Default, User)

Setting 2

Item	Description

Terminal	Sets the COMPUTER IN 2/MONITOR
	OUT terminal. (Computer2, Monitor
Power	out)

management	Sets into the selected power manage-
	ment mode (Ready, Shutdown, OFF) if
	the input signal is interrupted and no
	control key is pressed for the specified
	period of time.
	*The specified time can be set 1 to 30
Direct on	min.
	Sets the power-on mode when the AC cord is connected to the outlet. (ON, OFF)
Lamp control	Selects lamp control mode. (High, Normal, Eco)
Key lock	Sets the prohibition of controls either Projector or Remote control. (OFF, Projector
Fan control	keys, Remote control)
	Sets the fan control speed.
	OFF	Normal mode
	ON1	Highland mode 1
Lamp Corres.	ON2	Highland mode 2

Value(h)	Displays the lamp use time (Corresponding value) . Reset the time after lamp
	replacement. Click "Reset", a confirmation display appears, and then click "OK", the
	time will be reset.

40

Image 40

Sanyo PLC-XK3010 owner manual Setting

Contents

Wired Setting Projector Set-up and Operation Network Set-up and Operation Compliance Federal Communications Commission NoticeAddress Telephone No 818998-7322 Safety instructions Table of contents Chapter Features Web Management function +p.31 Network specifications of the projector Required operating environment for computers Use of this manual Expression/AbbreviationTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Numerical value is a setting example Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Display of main setting Main setting page in the displaySub menu tab Switches the sub menu tab Main menu Setting How to use the setting Example of the setting Select an item by selecting a radio button Select items by ticking on check boxes Initial setting Network PIN code setting PJLink and password settingTo 32 alphanumeric characters can be used for the password Whats PJLink? Displays the selected LAN mode Network configurationSets Dhcp configuration ON/OFF Mail setting Setting Smtp server and administrator address Registering and deleting E-mail addresses Setting Smtp authentication Setting POP serverOption selection for sending alert mail Option Examples Type and contents of alert mail Snmp setting Trap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Power control and status check Service in needDisplays the status of the projectors power. Refer to next Popup confirmation window About projector condition Status Description Control Input System Item Description Sound Suppresses the sound. ON, OFF Image adjustment PC adjustment Setting up the projector Screen setting Setting Sets the black out image temporarily. ON, OFF Sets the image to freeze mode. ON, OFF Information InformationItems Description Indication of the lamp status Status Controlling the Projector Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the network Entrance hall Control Use of telnetUse the IP address assigned to the projector Command Function Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting JavaScript Setting Netscape Navigator MAC OS X v Safari Why doesn’t the setting page appear in my web browser? How can I restrict access from the computer How can I install several projectors? Why am I not receiving E-mail alert messages? Why cant be turned on/off with web browser?Ting What is the MAC address assigned to the projector? What are the rules for IP address assignment? Can I update the firmware of the projector SO-KT8AE