What are the rules for IP address assignment? | Sanyo PLC-XK3010

Chapter 5 Appendix

Others

QWhat are the rules for IP address assignment?

AIf the network is constructed with TCP/IP protocol, a unique IP address is required for each piece of network equipment. The following are basic rules of the assign- ment.

Rule1

Do not configure the same IP address to the network equipment in the same network group. Each piece of equipment must be assigned a unique IP address.

If the IP address is set [192.168.x.x], the Subnet Mask should be set [255.255.255.0] for example.

Rule2

The start address [xxx.xxx.xxx.0] and the last address [xxx.xxx.xxx.255] of the IP address must not be assigned to any other equipment. These address numbers are reserved.

Rule3

The IP address must correlate to a network number. If network numbers are different between the equipment, they cannot establish communications each other. In this case, the router is placed in the networks to make the rout- ing.

QCan I control the projector by using the telnet application?

APossible. Please refer to the item "Use of telnet" (☞ p.48 - 49).

QWhat is the MAC address assigned to the projector?

AThe MAC address is displayed in "Network information" menu of the projector (☞ p.14) and in "Information" menu through the web browser (☞ p.42).

58

Image 58

Sanyo PLC-XK3010 What are the rules for IP address assignment?, What is the MAC address assigned to the projector?

Contents

Wired Setting Projector Set-up and Operation Network Set-up and Operation Address ComplianceFederal Communications Commission Notice Telephone No 818998-7322 Safety instructions Table of contents Chapter Features Web Management function +p.31 Network specifications of the projector Required operating environment for computers Use of this manual Expression/AbbreviationTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Numerical value is a setting example Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display Setting How to use the setting Example of the setting Select an item by selecting a radio button Select items by ticking on check boxes Initial setting To 32 alphanumeric characters can be used for the password Network PIN code settingPJLink and password setting Whats PJLink? Displays the selected LAN mode Network configurationSets Dhcp configuration ON/OFF Mail setting Setting Smtp server and administrator address Registering and deleting E-mail addresses Option selection for sending alert mail Setting Smtp authenticationSetting POP server Option Examples Type and contents of alert mail Snmp setting Trap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkService in need Popup confirmation window About projector condition Status Description Control Input System Item Description Sound Suppresses the sound. ON, OFF Image adjustment PC adjustment Setting up the projector Screen setting Setting Sets the black out image temporarily. ON, OFF Sets the image to freeze mode. ON, OFF Information InformationItems Description Indication of the lamp status Status Controlling the Projector Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the network Entrance hall Control Use of telnetUse the IP address assigned to the projector Command Function Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting JavaScript Setting Netscape Navigator MAC OS X v Safari Why doesn’t the setting page appear in my web browser? How can I restrict access from the computer How can I install several projectors? Why am I not receiving E-mail alert messages? Why cant be turned on/off with web browser?Ting What is the MAC address assigned to the projector? What are the rules for IP address assignment? Can I update the firmware of the projector SO-KT8AE