Sanyo PLC-XL45 owner manual Basic Operation Turning Off the Projector

Basic Operation

Turning Off the Projector

1	Press the POWER ON-OFF button on the top control
	or on the remote control, and “Power off?” appears on
	the screen.
2	Press the POWER ON-OFF button again to turn off the
	projector. The POWER indicator starts to blink red, and
	the cooling fans keep running. (You can select the level
	of the fans’ quietness and running speed. See page
		“Power off” disappears after 4 seconds.
	49.) At this time you can unplug the AC power cord
	even if the fans are still running.
3	When the projector has cooled down enough to be
	turned on again, the POWER indicator stops blinking.

TO MAINTAIN THE LAMP LIFE, ONCE YOU TURN

THE PROJECTOR ON, WAIT AT LEAST 5 MINUTES

BEFORE TURNING IT OFF.

DO NOT OPERATE THE PROJECTOR

CONTINUOUSLY WITHOUT REST. CONTINUOUS

USE MAY RESULT IN SHORTENING THE LAMP

LIFE. TURN OFF THE PROJECTOR AND LET STAND

FOR ABOUT AN HOUR IN EVERY 24 HOURS.

✔Note:

•When the On start function is “On,” this projector is turned on automatically by connecting the AC power cord to an AC outlet (p. 46).

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING indicator blinks or emits a red light, see “Warning Indicator” on page 50.

•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.

•The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan cooling is completed, compared with the time the AC power cord is immediately unplugged after the power-off.

http://www.pureglare.com.au 19