Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked

Installing the Projector in Proper Position

Install the projector properly. Improper Installation may reduce the lamp life and cause fire hazard.

or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

–  Do not put any flammable objects or spray can near the projector. Hot air is exhausted from the air vents.

–  Keep the exhaust vent at least 3’ (1 m) away from any objects.

–  Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used.

–  Do not put anything on the projector. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.

Cooling fans are provided to cool down the projector. The fan’s running speed is changed according to the temperature inside the projector.

20˚

20˚

20˚

Do not tilt the projector more than 20 degrees from side to side.

Do not point the projector up to project an image.

Do not point the projector down to project an image.

Do not put the projector on either side to project an image.

Do not tilt the projector more than 20 degrees backward and forward.

Exhaust Vent (Hot air exhaust)

Exhaust Vent

 

Air Intake

(Hot air exhaust)

 

Vent

 

 

 

 

 

 

 

 

 

 

Air Intake

Vent

20˚

Moving the Projector

When moving the projector, replace the lens cover and retract the adjustable feet to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into a suitable case.

Handle the projector carefully; do not drop, bump, subject it to strong forces, or put other things on the cabinet.

CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR

–  Do not drop or bump the projector, otherwise damages or malfunctions may result.

–  When carrying the projector, use a suitable carrying case.

–  Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

–  Do not put the projector in a case before it is cooled enough.



http://www.pureglare.com.au

Page 6
Image 6
Sanyo PLC-XL45 Safety Instructions Air Circulation, Installing the Projector in Proper Position, Moving the Projector