Basic Operation
Focus Adjustment
Adjust the lens focus with the focus lever.
Keystone Correction
If a projected picture has keystone distortion, correct the image with the Keystone function.
Press the KEYSTONE button on the top control or on the remote control. The keystone dialog box appears. Correct keystone distortion with the Point ed buttons. Keystone adjustment can be stored (p.41).
Reduce the upper width | Reduce the lower width | ||||||||
with the Point e button. | with the Point d button. | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Focus Lever
•The arrows are white when there is no correction. •The direction of the arrow which are being corrected
turns red.
•The arrows disappear at the maximum correction. •If you press the KEYSTONE button on the top control
or on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment is canceled.
•The adjustable range can be limited depending on the input signal.
•The projected picture may fluctuate momently depending on the keystone adjustment.
•“Keystone” disappears after 4 seconds.
Top Control
|
|
| KEYSTONE |
|
|
| button |
| POWER | WARNING LAMP REPLACE | |
ON | MENU | INPUT | KEYSTONE |
OFF |
|
| |
- |
|
|
|
| SELECT |
|
|
|
|
| POINT ed buttons |
|
|
| + |
-VOLUME
VOLUME
Remote Control
KEYSTONE button
POINT ed buttons
22 | http://www.pureglare.com.au |
