Sanyo PLC-XL45 Remote Control Battery Installation, Operating Range, Part Names and Functions

Part Names and Functions

Remote Control Battery Installation

1	Open the battery
	compartment lid.

2	Install new batteries into	3	Replace the
	the compartment.		compartment lid.

Two AA size batteries

For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment.

To insure safe operation, please observe the following precautions: ● Use two (2) AA or LR6 type alkaline batteries.

●Always replace batteries in sets.

●Do not use a new battery with a used battery.

●Avoid contact with water or liquid matter.

●Do not expose the remote control to moisture or heat.

●Do not drop the remote control.

●If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.

●Risk of explosion if a battery is replaced by an incorrect type.

●Dispose of used batteries according to the instructions.

Operating Range

Point the remote control toward the projector
(Infrared Remote Receiver) when pressing
any button. Maximum operating range for the
remote control is about 16.4’ (5 m) and 60	30°
degrees in front of the projector.

30°

16.4’ (5 m)

12 http://www.pureglare.com.au