Specifications, Installing the Batteries | Hand Held Products 800

Specifications

	Item	Specification

	Dimensions	4.30”W x 2.75”H x 5.25”D
	Dimensions	(10.9 cm W x 7.0 cm H x 13.3 cm D)
		(10.9 cm W x 7.0 cm H x 13.3 cm D)

	Weight	1.0 lb. (454 g) with wand attached and batteries
	Weight	installed
		installed

	Temperature	Storage: -20° to 70°C
	Temperature	Operational: 0° to 50°C
		Operational: 0° to 50°C

	Humidity	5% to 95% RH non condensing

	Sealability	Designed to meet NEMA 1

	Regulatory approvals	FCC - Class A limits

	Display	4 x 20 characters/line LCD

	Keypad	6-button: POWER, SELECT, ↑, ↓, ←, →

	Audible signal	Volume/tone adjustable beeper
	Audible signal	(includes volume off position)
		(includes volume off position)

	LED indicators	Five tri-colored LEDs

	Batteries	Four “AA” NiCad

	Data Buffer	32 KB; the onboard memory can store data and scan
	Data Buffer	profiles.
		profiles.

Installing the Batteries

The Quick Check 600/800 Verifier is shipped with four “AA” NiCad rechargeable batteries. You must install the batteries in the unit before you use it. The batteries may be discharged and need to be charged.

You must install the four NiCad rechargeable batteries in the Quick Check 600/800 Verifier before you connect the charger or

WARNING the printer to the unit. If you do not install the batteries first, you may damage the unit and consequently void the warranty. Use

only the supplied batteries. If you use other types of batteries (such as alkaline) and attempt to recharge them, you could cause the batteries to explode, damage the unit, and possibly cause a personal injury. Damage caused by attempts to recharge any batteries, except those supplied with the unit, voids any and all Quick Check 600/800 Verifier warranties.

Quick Check® 600/800 Series User’s Guide

1 - 7

Image 13

Hand Held Products 800, 600 manual Specifications, Installing the Batteries

Contents

User’s Guide For European Community Users DisclaimerWaste Electrical and Electronic Equipment Information Table of Contents Reviewing Scan Data Saving and Printing Chapter Customer Support About This Guide Getting Started Unpacking the Quick Check 600/800 Verifier SymbolDescription Power or Select or ↑, ↓, ←, →Term in manual Term in software Quick Check 600/800 Verifier Noting the Verifier’s Features EAN/UPC Display Special FeaturesLEDs Buttons Ports Installing the Batteries SpecificationsSpecification Charging the Batteries To Install the BatteriesTo charge the batteries To turn on the unit Turning the Unit On and Off No Printer Attached, then refer to .a Quick Check 600/800 Series User’s Guide To turn off the unit Calibrating the Quick Check 600/800 VerifierTo calibrate the Quick Check 600/800 Verifier To scan properly using a mouse wand To scan properly using a pen wandProperly Scanning With the Unit Accessories and Options Cleaning the WandItem/DescriptionOrder code Documentation Quick Check 600/800 Series User’s Guide Quick Start Guide Print your scan results Review the option settings Changing the Specifications Changing the SettingsSymbologies Symbologies Symbology Parameters defaults are in bold Symbology Specifications Expand U.P.C./EO Magnification FactorCheck Options Modes Shown Character Translation Table Code 128, Code 16K, and Code Character Font & Tolerances Wide-to-Narrow Ratio To modify the symbology optionsFixed Message Length → or Select Industry Applications Scan Grade Changing the Test CriteriaTo select an application ISO/IEC grades DecodabilityNumber of Scans Changing the Scanning Options To return to the previous menu, press PowerTo change the test criteria Extended Accuracy Beeper PitchDecode Direction To change the scanning options Display Options Changing the Output OptionsParameter Result Lines AutoPrint/Store Print Options To change the output options Scan ProfileTo change the display options Locking the Settings Resetting the Default SettingsTo reset a unit To change the printout options About Command Codes Using a Command Code Generic Code Selections C./EAN/JAN Enable On or Off Customized Command Codes Choosing a Command Code To create a customized Command Code To use a customized Command CodeTo request a Command Code from Hand Held Products Quick Check 600/800 Series User’s Guide Reviewing Scan Results Reviewing Scan DataScan Grades ISO/IEC Symbol Grade Determining the ISO/IEC Symbol Grade Quick Check 600/800 Series User’s Guide Reviewing a Scan Example To obtain the scan grade and ISO/IEC Symbol grade Quick Check 600/800 Series User’s Guide To review data from the last scan LED Display Bar growth LCD bar growth LED lit Tolerance used Indication Audio Sounds Errors in Dimensional Parameters Reviewing the Dimensional ParametersParameter Trad’l Parameter Result Calculating To review the dimensional parameters Reviewing the Reflectance Parameters PCS Errors in Reflectance Parameters To review the reflectance parameters Symbol Contrast, Minimum and Maximum Reflectance Reviewing the Format Parameters Errors in Format Parameters Reviewing Messages To review the format procedures Sstr Codes Using Sstr Codes to Review DataSstr Code Type Test Criteria Name To quickly review data using Sstr Codes Using the Quick Check Verifier as a ReflectometerTo return the customized display to the default display To customize the result display To use the Quick Check Verifier as a static reflectometer Saving Data Saving and PrintingChecking the Print Buffer During Operation To save scan data To check the print buffer during operation Printing DataTo clear delete the records stored in the memory, press → To print current data To print stored data Deleting Stored DataTo stop printing Reviewing the Printouts Interfacing With a ComputerTo delete stored data QCP and Qchsp Printouts Printing Guidelines Using the QCP or Qchsp Switch Position Function To install or replace the QCP or Qchsp paper roll To set up the QCP or QchspTo turn on and off the QCP or Qchsp To remove the ribbon from the QCP or Qchsp To perform a QCP or Qchsp self-test Troubleshooting the QCP or Qchsp Quick Check 600/800 Series User’s Guide General Bar Code Information Background Information Symbology Industries Organization Symbology Specifications GS1 formerly UCC and EAN Symbology Characteristics Quick Check 600/800 Series User’s Guide How a Bar Code Verifier Works Symbology Character Set WidthsElement Additional Information Quick Check 600/800 Series User’s Guide Understanding the DataMatch Feature Using DataMatchDownloading DataMatch Structuring and Loading the Database SYM Identifier Code To load the database into the verifier Decode Quick Check 600/800 Series User’s Guide To select DataMatch Selecting the DataMatch Feature Reviewing DataMatch Results Quick Check 600/800 Series User’s Guide General Operation Using a Quick Check 800 Verifier Reflectance-Based Information Percent Decoded/Scanned ModeScanProfile Output Print Results Calculate Decoded/Scanned Change Settings Change Settings Test Criteria #Scans/Symbol nnn Type Display Message Printout Message Error, Application, and Type Messages Database ECV /VCVS Bookland Quick Check 600/800 Series User’s Guide Ccbba Hibcc EAN ITF SCS /ITF EAN SCS Quick Check 600/800 Series User’s Guide Flow Charts Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Sstr Codes Quick Check 600/800 Series User’s Guide Special Codes Quick Check 600/800 Series User’s Guide Unrecognized Symbols Unrecognized Symbols Quick Check 600/800 Series User’s Guide To restore the display TroubleshootingCustomer Support To check the software version Latin America Limited Warranty Quick Check 600/800 Series User’s Guide Page Hand Held Products, Inc