Part Names and Functions
Remote Control Battery Installation
1 Open the battery compartment lid.
2 Install new batteries into the compartment.
Two AA size batteries
For correct polarity (+ and
3 | Replace the | |
compartment lid. | ||
|
To insure safe operation, please observe the following precautions:
●Use two (2) AA or LR6 type alkaline batteries.
●Always replace batteries in sets.
●Do not use a new battery with a used battery.
●Avoid contact with water or liquid.
●Do not expose the remote control to moisture or heat.
●Do not drop the remote control.
●If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
●Risk of explosion if a battery is replaced by an incorrect type.
●Dispose of used batteries according to the instructions.
Remote Control Operating Range
Point the remote control toward the projector (Infrared Remote Receiver) when pressing the buttons. Maximum operating range for the remote control is about 16.4’ (5 m) and 60 degrees in front of the projector.
16.4’ (5 m)
60° 
Remote control
13
