Video Input

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation

Top Control

Choose Computer 2 by pressing the COMPUTER 2 button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

COMPUTER 2 button

Menu Operation

1

Press the MENU button to display the On-Screen

 

Menu. Press the Point 78 buttons to move the red

 

frame pointer to the Input Menu icon.

2

Press the Point ed buttons to move the red arrow

 

pointer to Computer 2 and then press the SELECT

 

button.

 

3

After the Source Select Menu appeared for Computer

 

2, move the pointer to Component or RGB(Scart) and

 

then press the SELECT button.

 

When the input source is coming from video

Component

 

 

equipment connected to the COMPUTER IN

 

 

 

 

2 / COMPONENT IN terminal with a

 

 

Component-VGA Cable, select Component.

REMOTE CONTROL

COMPUTER button

Computer 1

Computer 2

Input Menu

Input Menu icon

 

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Source Select Menu

Move the pointer to Component or RGB(Scart) and press the SELECT button.

RGB (Scart)

When the input source is coming from video equipment connected to the COMPUTER IN 2 / COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).

Note:

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.45).

36

Page 36
Image 36
Sanyo PLC-XU 101K owner manual Input Source Selection Component, RGB Scart 21-pin, Video Input, Top Control