Setting
Setting
This projector has Setting menu that allows you to set up the other various functions described as follows;
1 | Press the MENU button | to display the |
| Menu. Press the Point 7 | 8 buttons to move the red |
| frame pointer to the Setting Menu icon. | |
2 | Press the Point ed buttons to move the red frame | |
| pointer to the item that you want to set and then press | |
the SELECT button. The Setting dialog box appears.
Language
The language used in the
Keystone
This function corrects distortion of a projected image. Select either Store or Reset with the Point 7 8 buttons, and then press the SELECT button. The keystone dialog box will appear. Correct keystone with the Point ed buttons. (p.24)
Store .........store the keystone correction even when the
AC power cord is unplugged.
Reset ........reset the keystone correction when the AC
power cord is unplugged.
Blue back
Press the Point 7 8 buttons to switch On/Off. When this function is “On,” a blue image is displayed while the input signal is not detected.
Display
Press the Point 7 8 buttons to switch On/Off. This function decides to display
On .........................Show all the
this function when you want to project images after the lamp becomes bright enough. Factory default setting is this mode.
Countdown off ......Show the input image instead of the
countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.
Off .........................Do not show
except;
●
●“Power off?” message
●
●“No signal” message for Power management item (p46)
●”Please wait...” message
●White arrows for True item in the Screen Menu (p33)
Setting Menu (Language)
Set the red frame | Setting Menu |
pointer to the item | icon |
and press the |
|
SELECT button. |
|
Press the SELECT button at
Language item, the
Language Menu will appear.
Press the SELECT button at this item to display the other languages.
Press the SELECT button at this item to close the dialog box.
42
