Computer Input

Input Source Selection

Direct Operation

Choose either Computer 1 or Computer 2 by pressing the COMPUTER 1 button or COMPUTER 2 button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Menu Operation

1

Press the MENU button to display the On-Screen

 

Menu. Press the Point 78 buttons to move the red

 

frame pointer to the Input Menu icon.

2

Press the Point ed buttons to move the red arrow

 

pointer to either Computer 1 or Computer 2, and then

 

press the SELECT button.

3

When selecting Computer 1, input source will be

 

selected directly.

When selecting Computer 2, the Source Select Menu appears. Move the pointer to RGB and then press the SELECT button.

Notes:

•Computer 1 can accept only RGB signal.

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.45).

Top Control

COMPUTER 2 button

COMPUTER 1 button

REMOTE CONTROL

COMPUTER button

Computer 1

Computer 2

Input Menu

Move the pointer (red arrow) to Computer 1 and press the SELECT button.

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Source Select Menu

Move the pointer to RGB and press the SELECT button.

26

Page 26
Image 26
Sanyo PLC-XU 101K owner manual Computer Input, Input Source Selection, Input Menu, Source Select Menu