Video Input

Input Source Selection (Video, S-Video)

Direct Operation

Top Control

Choose Video by pressing the VIDEO button on the top

VIDEO button

control or the remote control.

 

Before using these buttons, correct input source should be

 

selected through menu operation as described below.

 

REMOTE CONTROL

VIDEO button

Menu Operation

Input Menu icon

 

 

Input Menu

 

 

 

1

Press the MENU button to display the On-Screen

 

 

 

 

 

 

 

 

Menu. Press the Point 78 buttons to move the red

Move

the

pointer

to

 

frame pointer to the Input Menu icon.

 

 

Video

and

press

the

 

 

SELECT button.

 

2

Press the Point ed buttons to move the red arrow

 

pointer to Video and then press the SELECT button to

 

display the Source Select Menu .

3

Move the pointer to the desired source and then press

 

the SELECT button.

 

 

When selecting Auto, the projector automatically

 

Auto

 

detects incoming video signal, and adjusts itself

 

 

 

 

to optimize its performance. The projector

 

 

selects connection in the following order:

 

 

1. S-Video

 

 

2. Video

 

 

When video input signal is connected to the

 

Video

 

VIDEO jack, select Video.

 

 

 

 

When video input signal is connected to the S-

S-Video

VIDEO jack, select S-Video.

 

 

VIDEO

Source Select Menu (VIDEO)

Move the pointer to the source that you want to select and press the SELECT button.

Note:

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.45).

35

Page 35
Image 35
Sanyo PLC-XU 101K owner manual Video Input, Input Source Selection Video, S-Video