Sanyo PLC-XU 101K owner manual Video System Selection, Auto, AV System Menu Video or S-Video

Video Input

Video System Selection

1	Press the MENU button	to display the On-Screen
	Menu. Press the Point 7	8 buttons to move the red
	frame pointer to the AV System Menu icon.
2	Use the Point ed buttons to move the red arrow
	pointer to the desired system and then press the

SELECT button.

Video or S-Video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV System Menu (Video or S-Video)

AV System Menu icon Selected system is displayed.

Move the pointer to a system and press the SELECT button.

AV System Menu (Component)

Component

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

✔Note:

The AV System Menu cannot be selected when selecting RGB(Scart).

AV System Menu icon Selected system is displayed.

Move the pointer to a system and press the SELECT button.

37