Lift the front of the projector and pull the Feet lock latches on both sides of the projector.
Release the Feet lock latches to lock the Adjustable feet and rotate the Adjustable feet to adjust position and tilt.

Installation

Positioning the Projector

This projector is designed to project on a flat projection surface.

The projector can be focused from 3.6’(1.1m) ~ 19.7’(6.0m).

Refer to the figure below to adjust a screen size.

*The lens is at the top of the lens shift.

ROOM LIGHT

The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image.

19.7’(6.0m)

14.8’ (4.5m)

 

 

9.8’ (3.0m)

 

 

 

200”

 

 

 

 

 

 

 

 

 

3.9’(1.2m)

 

 

150”

Max. Zoom

 

 

 

 

 

 

169”

 

 

 

 

100”

 

 

 

 

 

 

 

Min. Zoom

 

 

 

 

 

125”

H

 

 

 

 

 

 

 

40”

 

83”

 

 

 

 

 

31”

 

 

 

 

 

 

Screen Size

30"

40”

100”

150”

 

200”

 

 

 

 

 

 

 

 

(W x H) mm

663 x 373

884 x 497

2209 x 1244

3314 x 1866

4419 x 2489

 

 

 

Zoom (min)

3.6’(1.1m)

4.6' (1.4m)

11.8' (3.6m)

17.7' (5.4m)

–––––

 

Zoom (max)

–––––

3.9’ (1.2m)

9.8’ (3.0m)

14.8' (4.5m)

19.7’(6.0m)

 

Tilting the Projector

Picture tilt and projection angle can be adjusted by rotating the Adjustable feet. Projection angle can be adjusted up to 11.8 degrees with the Adjustable feet.

1

2

3 To retract the Adjustable feet, lift the front of the projector and pull and undo the Feet lock latches.

Keystone distortion of a projected image can be adjusted by menu operation or the remote control. (Refer to page 21 and 42.)

ADJUSTABLE FEET

CAUTION

Tilt the projector within the adjustable range in order not to shorten the life of the lamp. Proper angle should be taken. Refer to page 5.

FEET LOCK LATCH

15