Computer Input
4 Choose one of the positions from the Mode 1 to 5 where you To store adjustment data. want to store with the POINT UP/DOWN button, and press the
SELECT button. Select "Yes" with the SELECT button and close the menu by pressing the SELECT button at the Quit.
|
| Vacant Mode This Mode has parameters being stored. | |
|
|
|
|
5 | To clear the adjustment parameters previously set, select the | To clear adjustment data. |
|
Mode free with the POINT UP/DOWN button and press the |
|
| |
| POINT RIGHT button. Choose the mode that you want to clear |
|
|
| with the POINT UP/DOWN button, and then press the SELECT |
|
|
| button. Select "Yes" with the SELECT button and close the |
|
|
| menu by pressing the SELECT button at the Quit. |
|
|
|
| Shows values of “Total dots,” | Quit |
|
| “Horizontal,” “Vertical,” “Display |
|
|
| area H,” and “Display area V.” |
|
The items that you can adjust are the following:
Fine sync
Adjust an image as necessary to eliminate flicker from the display. Press the POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)
Total dots
The number of total dots in one horizontal period. Press the POINT LEFT/RIGHT button and adjust number to match your computer image.
Horizontal
Adjust horizontal picture position. Press the POINT LEFT/RIGHT button to adjust the position.
Vertical
Adjust vertical picture position. Press the POINT LEFT/RIGHT button to adjust the position.
|
|
|
| Current mode | Press the POINT |
| Current mode |
| |||
|
|
| RIGHT button at the | ||
|
|
|
|
| |
Press the POINT RIGHT button to show the information of the |
| Current mode icon to | |||
computer connected. |
| show the information of | |||
| the computer | ||||
|
|
|
|
| |
|
|
|
|
| connected. |
| Clamp |
|
|
| |
|
|
|
| ||
Adjust clamp level. When the image has a dark bar(s), try this adjustment.
36