Computer Input / (RGB Scart 21-Pin Video Input)

Input Source Selection (Direct Operation)

INPUT BUTTON

You can select Computer input or Video input with the INPUT button. (The input source that is selected last is selected when the projector is turned on.)

If the projector cannot reproduce proper image, select a correct input source through menu operation as shown below.

RGB Scart Input

When RGB Scart 21-pin output is available in video equipment, connect the Scart connector to the "COMPUTER IN" on the projector with an optionally supplied Scart-VGA cable. It can reproduce higher resolution and quality of picture. (See page 51 for order.)

To select RGB Scart input, follow the procedures described below.

Note

RGB Scart input (COMPUTER IN) can receive 575i only.

INPUT button

Computer

 

 

Video

 

 

TOP CONTROL

REMOTE CONTROL

 

INPUT

IMAGE

INPUT

 

 

SELECT

VIDEO

IMAGE

 

AUTO

NO SHOW 1

 

VIDEO

2

INPUT button

Input Source Selection (Menu Operation)

1 Press the MENU button, and the main menu appears. Select Input Source Selection menu the Input Source Selection menu with the POINT UP/DOWN

button, and then press the POINT RIGHT button to enter the sub-menu.

Input Source Selection menu

2 Choose the Computer with the POINT UP/DOWN button and press the POINT RIGHT button. The Source selection menu appears.

Close the Input Source Selection menu.

3

Move the pointer to the source that you want to select with the Source Selection menu

POINT UP/DOWN button, and press the SELECT button.

 

To select computer input, select the RGB.

 

To select RGB Scart 21-pin video input, select the RGB (Scart).

 

Close the source selection menu.

 

*Select the RGB (Scart) only when connecting the projector with

 

the Scart-VGA cable.

 

Close the source selection menu.

31