Computer Input
Computer System Selection
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, or SXGA in most cases (refer to “Compatible Computer System” on the next page). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting.
The projector displays one of the Auto, - -
Auto
- - -
When the projector cannot recognize the connected | Computer System Selection menu |
system as computer system provided in this projector, |
|
Auto PC Adjustment function operates to adjust the |
|
projector and the message “Auto” is displayed on the |
|
System box. (Refer to p34.) Store the adjusted data by |
|
the Auto PC Adjustment function so as to use the system |
|
again. When the image is not provided properly, manual |
|
adjustment is required. (Refer to page 35, 36, and 37.) |
|
There is no signal input from the connected computer. |
|
Make sure the connection of the computer and the |
|
projector is set correctly. |
|
(Refer to the Troubleshooting section on page 47.) |
|
The System box displays the system being selected.
Mode 1
SVGA 1
User preset adjustment in Computer Adjustment (Manual). Adjustment data can be stored Mode 1 - 5.
Computer systems provided in the projector. The projector chooses proper system and displays it.
*Mode 1 and SVGA 1 are examples.
1 Press the MENU button, and the main menu appears. Select the Computer System Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the
Computer System Selection menu
Custom Mode (1~5) set in the
Computer Adjustment menu.
Computer System Selection menu
2 Choose the system that you want to select with the POINT UP/DOWN button, and then press the SELECT button to activate the item.
Selected System
The systems displayed on the
Close the Computer System Selection menu.
32