Sanyo PLV-Z1, PLV-Z1BL Video Input

Video Input

Input Source Selection (Direct Operation)

INPUT BUTTON

You can select Video input or Computer input with the INPUT button. (The input source that is selected last is selected when the projector is turned on.)

If the projector cannot reproduce proper video source, select correct input source through menu operation on the next page.

RGB Scart Input

To select RGB Scart 21-pin video input through the computer input terminal, follow the procedures described at the section "Input Source Selection" on page 31.

INPUT button

Video

Computer

TOP CONTROL	REMOTE CONTROL
	INPUT	IMAGE
INPUT
SELECT	VIDEO	IMAGE
	AUTO NO SHOW	1
	VIDEO	2

INPUT button

AUTO / VIDEO / S-VIDEO / COMPO BUTTON

Press AUTO, VIDEO, S-VIDEO, or COMPO button on the remote control according to video input.

*It is convenient for you to select the AUTO as the projector automatically detects incoming video signal, and adjust itself to optimize its performance.

AUTO	When selecting the AUTO, the projector automatically
	detects incoming video signal, and adjusts itself to
	optimize its performance. The projector selects
	connection in the following order:
	1st Y-Pb/Cb-Pr/Cr
	2nd S-VIDEO
	3rd VIDEO
	The Y-Pb/Cb-Pr/Cr has priority over the S-VIDEO. The
	S-VIDEO has priority over the VIDEO.
	When video input signal is connected to VIDEO, select
VIDEO
	the Video.
	When video input signal is connected to S-VIDEO, select
S-VIDEO
	the S-Video.
	When video input signal is connected to Y-Pb/Cb-Pr/Cr,
COMPO
	select the COMPO.

REMOTE CONTROL

INPUT IMAGE

VIDEOIMAGE

AUTO NO SHOW 1

VIDEO2

KEYSTONE

S-VIDEO3

COMPONENT

COMPO4

AUTO / VIDEO / S-VIDEO / COMPO button

24