Computer Input

Computer Adjustment (Auto) (Direct Operation)

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.

Press the AUTO PC ADJ. button on the remote control, and the func-

REMOTE CONTROL

 

tion works.

 

 

 

To store the adjustment data, follow the step 3 and 4 on page 35, 36.

 

ON-OFF

AUTO PC ADJ. button

 

 

 

LIGHT

AUTO PC ADJ.

 

 

 

AUTO

 

 

MENU

SCREEN

 

Computer Adjustment (Auto) (Menu Operation)

1 Press the MENU button, and the main menu appears. Select Computer Adjustment menu the Computer Adjustment menu with the POINT UP/DOWN

button, and then press the POINT RIGHT button to enter the sub-menu.

Computer Adjustment menu

Choose the Auto PC Adj., and then press the SELECT button to

Selected Mode

Shows status (Stored/Free) of the

2 activate it.

 

selected mode.

 

 

Auto PC Adj.

adjusts Fine sync, Total dots, Horizontal, and Vertical to conform to your computer.

3 To store the adjustment parameters by Auto PC Adjustment, follow the step 3 and 4 on page 35, 36. Once the parameters are memorized, the setting can be done just by selecting Mode in the Computer System Selection menu.

NOTE

The Fine sync, Total dots, Horizontal, and Vertical of some computers cannot be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 35-37.)

The Auto PC Adjustment function cannot be operated when “720p (HDTV),” “1035i (HDTV)”, or “1080i (HDTV)” is selected in the Computer System menu (p32).

The Computer Adjustment menu cannot be operated when "RGB" is selected in the Computer System menu or "RGB (Scart)" is selected in the Source Selection menu.

34