Computer Input

Computer Adjustment (Manual)

This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by Multi- Scan system of this projector. If this happens, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture, or a skewed picture.

This projector has a manual computer adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it.

1 Press the MENU button, and the main menu appears. Select Computer Adjustment menu the Computer Adjustment menu with the POINT UP/DOWN

button, and then press the POINT RIGHT button to enter the sub-menu.

Computer Adjustment menu

Choose the item that you want to adjust, and then press the

Shows status

Press POINT

2 POINT LEFT/RIGHT button to adjust the value. The Fine sync

(Stored/Free) of the

LEFT/RIGHT button

Selected Mode selected mode.

to adjust the value.

and Total dots are displayed in a line. Press the SELECT button

 

 

after adjusting them. The on-screen menu returns to the sub-

 

 

menu.

 

 

Press the SELECT button at this icon to display other items.

Press the SELECT button at this icon to close the item.

3 To store the adjustment parameters, select the Store with the POINT UP/DOWN button and press the POINT RIGHT button.

Reset

To reset to previous level, select the Reset with the POINT UP/DOWN button and press the POINT RIGHT button. Select "Yes" with the SELECT button.

35