Sanyo PLV-Z2 Video Input

Video Input

Input Source Selection (INPUT 1 Terminal/Video, S-Video, Component)

Direct Operation

INPUT button

Choose Input 1 by pressing the INPUT button on the top control or on the remote control. Before using these buttons, correct input source should be selected through the INPUT 1 buttons on the remote control or through menu operation as described on the next page.

INPUT button

Input 1

Input 2

Top Control	Remote Control
	INPUT
SELECT

INPUT button

INPUT 1 buttons

Press the AUTO, VIDEO, S-VIDEO, or COMPO button on the remote			Remote Control
control according to video input.
It is convenient for you to select the AUTO as the projector automati-
cally detects incoming video signal, and adjust itself to optimize its
performance.
AUTO	When selecting the AUTO button, the projector automati-
	cally detects incoming video signal, and adjusts itself to
	optimize its performance. However, the projector
	selects connection in the following order under the condi-
	tion of connecting more than one input source:
	1st	Y-Pb/Cb-Pr/Cr
	2nd	S-VIDEO
	3rd	VIDEO
	Y-Pb/Cb-Pr/Cr has priority over S-VIDEO. S-VIDEO has
	priority over VIDEO.
VIDEO	When video input signal is connected to the VIDEO jack,		INPUT 1 buttons: AUTO / VIDEO / S-VIDEO / COMPO
	select Video.
S-VIDEO	When video input signal is connected to the S-VIDEO
	jack, select S-Video.
COMPO	When video input signal is connected to the Y-Pb/Cb-
	Pr/Cr jacks, select COMPO.

23