Computer Input

Computer System Selection

This projector can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustment function provided in the projector. When selecting computer input, the projector automatically displays the most proper image for the input signal. One of the following four displays appears on the system menu icon. If the projector does not tune the input signal and the projected image is not displayed properly, or when you wish to adjust it manually, perform manual adjustment as described on page 34 and 35.

Auto

When the projector cannot recognize the connected PC System Menu

signal as PC system provided in this projector, the Auto

 

 

PC Adjustment function operates to adjust the projector

 

and the message “Auto” is displayed in the PC System

 

Menu icon. When the image is not provided properly,

 

manual adjustment is required. (p34, 35)

 

There is no signal input from the connected computer.

– – – –

Check the connection of the computer and see if the

 

 

projector is set correctly.

 

(See “Troubleshooting” on page 47.)

 

User preset adjustment in Computer Adjustment.

Mode 1

Adjustment data can be stored in Mode 1 - 5. (p34, 35)

 

 

Computer systems provided in the projector. The

SVGA 1

projector chooses a proper system and displays it.

 

*Mode 1 and SVGA 1 are examples.

Menu Operation

PC system can also be selected manually if some PC systems appear PC System Menu on the On-Screen Menu.

1

Select the PC System Menu with the Point Up/Down button,

 

and then press the Point Right button to enter the sub-menu.

2

Choose the system that you want to select with the Point

 

Up/Down button and then press the SELECT button.

32