Sanyo PLV-Z2 5

Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

–Do not put any flammable objects near the vent.

–Keep the exhaust vent at least 1.5’(50cm) away from any objects.

–Do not touch a peripheral part of the exhaust vent, espe- cially screws and metallic part. This area will become hot while the projector is being used.

–Do not put anything on the cabinet. The materials put on the cabinet will not only get damaged but also cause fire hazard by heat.

Cooling fans are provided to cool down the projector. This projector monitors internal temperature and control the running speed of the cooling fans.

Installing the Projector in Proper Position

Install the projector properly. Improper Installation may reduce

the lamp lifetime and cause a fire hazard.

20˚	Do not tilt the projector more than 20
	degrees to either side.
20˚
	Do not point the projector down to
	project an image.

NO DOWNWARD

Do not put the projector on either

side to project an image.

NO SIDEWARD

	Moving the Projector
Exhaust Vent	When moving the projector, close the front cover and retract
(Hot air exhaust)	the adjustable feet to prevent damage to the lens and cabinet.
	When the projector is not in use for an extended period, put
	it into a suitable case.

		CAUTION IN CARRYING OR TRANSPORTING
		THE PROJECTOR
	–	Do not drop or bump a projector, otherwise damages or
		malfunctions may result.
	–	When carrying a projector, use a suitable carrying case.
Air Intake Vent	–	Do not transport a projector by using a courier or transport
		service in an unsuitable transport case. This may cause
		damage to a projector. To transport a projector through a
		courier or transport service, consult your dealer for best
		way.