Video Input

Input Source Selection (INPUT 2 Terminal/HDCP, Component, Scart)

Direct Operation

INPUT button

Choose Input 2 by pressing the INPUT button on the top control or on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Input 2

Input 1

 

 

Top Control

 

Remote Control

 

 

MENU

INPUT

 

 

SELECT

 

 

 

 

 

 

 

INPUT button

Menu Operation

 

 

1

Select the Input Menu with the Point Up/Down button, and then Input Menu

 

 

 

press the Point Right button to enter the sub-menu.

 

 

2

Select Input 2 with the Point Up/Down button and then press

 

 

 

the Point Right button. The Source Select Menu will appear.

 

 

3

Move the pointer to the source that you want to select and then

 

 

 

press the SELECT button.

 

 

RGB (AV HDCP)

 

 

 

 

 

 

 

When the input source compatible with HDCP is

 

 

 

 

coming from video equipment through the DVI ter-

 

 

 

 

minal, select RGB (AV HDCP).

 

 

Component

When the input source is coming from video

 

 

 

 

equipment connected to the DVI terminal with a

 

 

 

 

Component-DVI Cable, select Component.

 

 

RGB (Scart)

When the input source is coming from video

 

 

 

 

equipment connected to the DVI terminal with a

 

 

 

 

Scart-DVI Cable, select RGB (Scart).

 

 

NOTE

 

Source Selection Menu

● HDCP (High-bandwidth Digital Content Protection) is a system for

 

 

protecting digital entertainment content delivered by DVI (Digital Visual

 

 

Interface) from being copied.

 

pointer

The specification of HDCP is decided and controlled by Digital Content

 

Protection, LLC. Should the specification be changed, this projector may

 

 

not display the digital content protected by HDCP.

● Component-DVI Cable and Scart-DVI Cable are options. See page 55 for order.

Closes the source selection menu.

25