Video Input

Sharpness

Press the Point Left button to soften the image and the Point Right button to sharpen the image. (From -7 to +7)

Gamma

Press the Point Left/Right button to obtain better balance of contrast. (From -7 to +7)

Auto grayscale

When this function is "ON", it automatically enhances contrast of bright and dark part of image.

Progressive

Interlace video signal can be converted to a progressive signal. Off ···· Not activated.

L1 ···· Select “L1” for an active picture.

L2 ···· Select “L2” for a still picture.

Film

When this function is on, it detects proper interleaving of 3-2 pull down for film-base sources and produces a suitable image for the input source. (This function is available only when selecting L1 or L2 on Progressive for NTSC.)

Reset

Resets all adjustment to their previous figure.

Store

To store the adjustment data, select Store and press the Point Right button. The Image Level Menu will appear. Choose one of 4 image levels with the Point Up/Down button and press the SELECT button. A confirmation box will appear and select [Yes].

NOTE

●You can also adjust items with the IMAGE ADJ. (IMAGE) button on the remote control. (p12)

●Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected.

This arrow indicates that there are previous items. Select this item and press the Point Up button to go to the previous item.

Press the Point Right button at this icon to store the value.

The Image Level Menu will appear. Choose one of 4 image levels with the Point Up/Down button and press the SELECT button. A confirmation box will appear and select [Yes].

29