Video Input

Menu Operation

1

Select the Input Menu with the Point Up/Down button, and then Input Menu

 

press the Point Right button to enter the sub-menu.

2

Select Input 1 with the Point Up/Down button and then press

 

the Point Right button. The Source Select Menu will appear.

3

Move the pointer to the source that you want to select and then

 

press the SELECT button.

Auto When selecting the AUTO button, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. However, the projector selects connection in the following order under the condition of connecting more than one input source:

1st Y-Pb/Cb-Pr/Cr 2nd S-VIDEO

3rd VIDEO

Y-Pb/Cb-Pr/Cr has priority over S-VIDEO. S-VIDEO has priority over VIDEO.

Video When video input signal is connected to the VIDEO jack, select Video.

S-VideoWhen video input signal is connected to the S-VIDEO jack, select S-Video.

Y,Pb/Cb,Pr/Cr When video input signal is connected to the Y-Pb/Cb- (component) Pr/Cr jacks, select Y,Pb/Cb,Pr/Cr.

Source Selection Menu

pointer

Closes the source selection menu.

24