Computer Input
Input Source Selection
Direct Operation
Choose INPUT 2 by pressing the INPUT button on the top control or on the remote control.
Before using these buttons, correct input source should be selected through menu operation as described below.
INPUT button
Input 2
Input 1
|
| Top Control | Remote Control |
|
|
| INPUT |
|
| SELECT |
|
Menu Operation | INPUT button | ||
| |||
1 | Select the Input Source Selection Menu with the Point Up/Down Input Menu |
| |
| button, and then press the Point Right button to enter the sub- |
| |
| menu. |
|
|
2 | Select Input 2 with the Point Up/Down button and then press |
| |
| the Point Right button. The Source Select Menu will appear. |
| |
3 | Move the pointer to the source that you want to select and then |
| |
| press the SELECT button. |
| |
RGB (Analog) | When the input source is analog coming from a |
| |
|
| computer through the DVI terminal, select RGB |
|
|
| (Analog). |
|
RGB (PC Digital) | When the input source is digital coming from a |
| |
|
| computer through the DVI terminal, select RGB (PC |
|
|
| Digital) |
|
Source Selection Menu
pointer
Closes the source selection menu.
31