Sanyo POA-PN02 owner manual Exclude/Add/Delete a projector, Status, Controlling the projector

Chapter 6 Controlling the Multi-Projectors

Exclude/Add/Delete a projector

To change the mode of the registered pro- jectors, select a mode with the pull-down menu button under the IP address of the target projector and then click Set button.

Mode	Operation
Control	Controlling the projector
Visual Control	Displaying the images
Both Control	Controlling and displaying images
OFF	Excluding from the multi-control
Delete	Deleting from the multi-control

Status

If some of the registered projectors are deactivated by some means (such as dis- connecting the power source, disconnect- ing the LAN cable, disconnecting from the network), control changes will continue to be effective for the projectors that are still activated. At the same time, the deactivat- ed projectors are excluded from the multi- control. The status of the registered pro- jectors are indicated under the projector name. See the table below for status indi- cations.

Status	Description
(blank)	The projector is connected to the network correctly
No connection	The projector may not connect to the network. Please check the connection and net-
	work configuration of this projector.
Password error	The login password is incorrect. The password for the multi-controlled projectors
	must be the same. Change password of this projector to the common password.
File Error	Not displaying the images. Check if this projector is using the Network Capture func-
	tion or Network Viewer function individually, or in the stand by mode.

✐If the multi-controlled projector is in the standby mode, any change is not effective except timer setting.

✐It is recommended that a specified projector should be chosen for setting as a master when you use this multi-control function. The control for the multi-controlled projectors will become too complicated operation if this function is used for each projector.

✐If the registered projector is not connected to the network, it will take some time to complete the multi-control operation because of waiting for the response from each registered projec- tor.

82