Sanyo POA-PN02 owner manual Serial port setting, Serial Control, Port, Other Settings

Serial port setting

Setting for controlling the equipment connected to the serial port from the computer

Serial Control :Selects “External”

Port:Sets according to the com- puter specified port no. Do not use port no. 10000*2.

Other Settings :Sets according to the com- munication condition of the equipment

Setting for controlling the projector from the serial controller connect- ed to the serial pot

Serial Control :Selects “Projector”

Port:Not specified. Do not use port no. 10000*2.

Other Settings :Sets according to the com- munication condition of the serial controller

Setting for controlling the projector from the computer through the LAN port

Serial Control	:Not specified
Port	:Not specified
Other Settings	:Not specified

* The port no. of the computer must be used with 10000.

*1 This product will restart automatically when “Port” or “Serial Control” is changed and it takes about 40 seconds.

*2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is reserved to control the projector through the LAN port.

✐Exclusive driver software for control of the external equipment is required. This product does not provide any driver software. Please consult your local dealer.

✐There are 2 types of RS-232C serial cable, Normal(Straight) and Reverse(Cross) type. Usually, when connecting between this product and a projector or a computer, use Reverse type of serial cable. When connecting DVD player etc., use Normal type.

Network Unit

OWNER’S MANUAL

ENGLISH

87