Making a 10-4 Call (Group Call)

You can make a 10-4 call to all members in a Group entry, which you have in your 10-4 List. You can communicate with up to five members at a time.

1.Press 10-4(left softkey) or press to access the 10-4 List.

2.Press Go to (left softkey), select the list from which you want to make a Group call (Company Groups or Personal Groups).

3.Highlight the group you want to call, and press and hold to place the call and take the floor. (You will see

10-4 calling... and Connecting... followed by “You have floor.

Continue with the 10-4 call as described previously.)

To make a 10-4 call to a group member, select your desired group, highlight your desired group member, and press and

hold .

If one of the group members takes the floor, you will see the member’s name and 10-4 number on the display. The phone beeps if you press 10-4 button when another contact has the floor.

4.When the call is finished, press .

Making a 10-4 Call by Entering a Number

1.From standby mode, enter the 10-4 number you want to dial.

2.Press to place the 10-4 call.

3.Continue with the 10-4 call, pressing and holding to speak and releasing it to allow others to reply.

4.When the call is finished, press .

– or –

1.Press 10-4(left softkey) or press to access the 10-4 List.

2.Press Go to (left softkey), select Enter 10-4#.

3.Enter the 10-4 number you want to dial.

4.Follow steps 2-4 above.

93

Page 101
Image 101
Sanyo SCP-2400 manual Making a 10-4 Call Group Call, Making a 10-4 Call by Entering a Number