Alert Notification

Your phone comes with several different options to keep you aware of what’s going on by sounding the alert or ringer.

To set the alerts:

1.Press to access the main menu.

2.Select Settings.

3.Select Sounds.

4.Select Alerts.

5.Select your desired option.

Service sets alert On or Off for network services parameter changes.

10-4sets an alert to notify you of 10-4 calls. Select 10-4 Calls for incoming 10-4 calls or 10-4 Missed for missed 10-4 calls.

Voicemail sets an alert to notify you of caller’s message(s). Select Ringer Length to set the ringer length of Voicemail notification.

Messaging sets an alert to notify you of Text, Picture Message, or Web Alerts. Select Ringer Length to set the ringer length of Messaging notification.

Minute Beep sets a minute reminder that beeps ten seconds before the end of each minute during a call.

Signal Fade sets alert to notify you when your phone loses a signal during a call.

6.Use your navigation key to select a setting and press .

Tip: You can select Once or Repeat Alert if you select 10-4, Voicemail, or Messaging. Repeat Alert sounds an alert every two minutes for twenty minutes. (For 10-4 calls, it sounds for 20 seconds continuously.)

31

Page 39
Image 39
Sanyo SCP-2400 manual Alert Notification