NORMAL RECORDING
Changes to the Recording Speed Mode During Recording
It is possible to permit or prevent changing the recording speed mode during recording.
1PressMENUthebutton until the (SET UP 4) menu is displayed.
@@@@@@@<SET@UP@4>
*SW@OUT
@@TIMING@@@@@@@@@@FIELD
@@FIELD@@@@@@@@@@@01
@@8H@@@@@@@@@@@@@@Y
*THREAD@CHECK@@@@@Y
*VIDEO@LOSS@@@@@@@N
*REC@SPEED@@@@@@@@N
*EJECT@SET
@@EJECT@MODE@@@@@@EJECT1
@@OPERATION@@@@@@@SLAVE
2 Press] thebutton,“RECuntilSPEED” settingtheis
Action to Take when the Video Signal Deteriorates
If there is no video signal during recording, or when a menu is not displayed (in stop, fast forward, rewind modes),“VIDEO LOSS” can be displayed
If in the (SET UP 5) menu “WARN.OUT” is set to “V.LOSS” or “T OR V”, a signal (0V) will be output at the
WARNING OUT terminal.
If in the (SET UP 2) menu, in the BUZZER section WARNING is set to“Y”, the buzzer will be heard. To stop
the buzzer, press the STOP button.
1PressMENUthebutton until the (SET UP 4) menu is displayed.
flashing.
3 Pressl the(orj) button to set
N . . . . . . . . . .
be changed
Y . . . . . . . . . .
changed
2 Press] thebutton,“VIDEOuntilLOSS” settingtheis
the flashingdesired.mode.
3 Pressl the(orj) button to set the Recording speed mode can not
N . . . . . . . . . . The
active.
Recording speed mode can be
Y. . . . . . . . . . . Th
4 PressPAUSE/SEARCHthe button to save the setting. 4 PressPAUSE/SEARCHthe button to save the setting.
English | 21 |