OUTPUT TERMINALS

WARNING OUT Terminal

•Ιφ τηε ταπε στοπσ ορ οτηερ προβλε∝, τηε ουτπυτ βεχο∝εσ 0ς (Λοω).

•Το ρεσετ τηε ουτπυτ, πρεσσSTOPτηε or ALL RESET button or unplug the power cord then plug it back in.

Tape movement stop

Ουτπυτ ρεσετ

5V (H)

(Output impedance: 5.7 Ω)k 0V (L)

WARNING OUT Terminal Output Setting

1PressMENUthebutton until the (SET UP 5) menu is displayed.

@@@@@@@<SET@UP@5>

*INPUT@OUTPUT@ALARM

*OUTPUT@@@@@@@SERIES

*WARN.@OUT@@@@TRANSPORT

*REMOTE@@@@@@@EJECT *TAPE@@@@@@@@@T-160

2 Press] thebutton,“WARNuntil. OUT” settingtheis flashing.

3 Pressl the(orj) button, to select the desired output mode.

TRANSPORT. The output becomes 0V (Low) when the tape stops or other probrem with the internal mechanism.

V. LOSS. . . . . The output becomes 0V (Low) when there is no video signal (Please refer“Actionto page 21,

to Take when the Video Signal Deteriorates.”).

T OR V . . . . . . The output become 0V (Low) when the tape stops or other problem with the internal mechanism, or when there is no video signal (Please refer to page 21, “Action to Take when the Video Signal Deteriorates.”).

NOTE:

•Ιφ ιν τηε (ΣΕΤ ΥΠ 4) ∝ενυ“VIDEO LOSS” is set to “N”, the “WARN. OUT” setting will be preset to “TRANSPORT” and cannot be changed.

4 PressPAUSE/SEARCHthe button to save the setting.

Ενγλιση

43