@@@@@@@<SET@UP@6>
*RS485
@@ADDRESS@@@@@@@000
@@TERMINATE@@@@@N
@@DATA@SPEED@@@@19200
@@STATUS@INFO@@@Y
@@ALARM@INFO@@@@Y
2 Pressl the(orj) button to set then press]buttonthe.
NOTES:
• Τηε αδδρεσσ χαν βε σετ βετωεεν 000 ανδ 127.
• Κεεπ τηε βυττον πρεσσεδ ανδ τηε σεττινγ ωιλλ χηανγε ραπιδλψ.
N. . . . . . . . . . . Th at the RS485 termi the warning state i RS485 terminal.
Y. . . . . . . . . . . Th information and war output at the RS48

SETTINGS FOR RS485 TERMINALS USE

If the VCR is going to be controlled trough a connection to5 Pressl the(orj) button“STATUSto setINFO” the

the RS485 terminals, be sure to first make the settings setting, then press the ] button. below.

NOTES:

•Χαν ονλψ βε υσεδ ωιτη τηε οπτιοναλ ΡΣ−485 βοαρδ.

•Ωηεν υσινγ τηε οπτιοναλ ΡΣ−485 βοαρδ, τηε ςΧΡ χαν βε χοντρολλεδ φρο∝ α σπεχιαλ χοντρολλερ.

1PressMENUthebutton until the (SET UP 6) menu is displayed.

°The “ADDRESS” setting is flashing.

6 Pressl the(orj) button“ALARMto setINFO” the

setting.

Y . . . . . . . . . . . The VCR alarm information (alarm recording start and stop) and video loss information are output at the RS485 terminal.

N. . . . . . . . . . . The VCR alarm information (alarm recording start and stop)

and video loss information are not

the VCR address,

output at the RS485 terminal.

NOTE:

• Τηε ϖιδεο λοσσ ινφορ∝ατιον ουτπυτ (σεντ) ωιλλ δεπενδ

ον τηε σεττινγσ “VIDEOφορ LOSS” in the (SET UP 4) menu.

7 PressPAUSE/SEARCHthe button to save the

3 Pressl the(orj) button to set the settingstermination,.then press] thebutton.

N . . . . . . . . . . Not terminated Y . . . . . . . . . . Terminated

4 Pressl the(orj) button to set the data transfer speed, then] buttonpress.the

19200 2400 48009600

38

English