Sanyo SRT-2400DC AUTOREPEAT RECORDING, Autorepeat Recording

AUTOREPEAT RECORDING

Autorepeat Recording		NOTES:
The same tape can be recorded over many times.		• Ιφ δυρινγ αυτορεπεατ ρεχορδινγ τηερε ισ αν αλαρ∝ τριγγερ
The same tape can be recorded over many times.		“AL” is displayed on the digital display and alarm
• Φολλοω τηεBefore starting steps, under“NORMAL		“AL” is displayed on the digital display and alarm
• Φολλοω τηεBefore starting steps, under“NORMAL		recording will take place. (Please refer to page 24,
RECORDING”.		recording will take place. (Please refer to page 24,
RECORDING”.		“ALARM RECORDING”.)
1 PressMENUthebutton until the (SET UP 3) menu is		“ALARM RECORDING”.)
1 PressMENUthebutton until the (SET UP 3) menu is		• Ιφ τηε“TAPE END MODE” setting is R 1, the REPEAT
displayed.		indicator will go off if there is an alarm trigger. After
		indicator will go off if there is an alarm trigger. After
@@@@@@@<SET@UP@3>		alarm recording, the recording will continue to the end
@@@@@@@<SET@UP@3>
*ALARM@MODE@@@@@@@Y1		of the tape then it will be rewound to the beginning and
*ALARM@SPEED@@@@@@8H		of the tape then it will be rewound to the beginning and
*ALARM@DURATION@@@20S		stop. “OFF” will be displayed on the digital display. To
*VERTICAL@SYNC@@@@Y		stop. “OFF” will be displayed on the digital display. To
*EXT@TIME@ADJ.@@@@01:00		turn off the buzzer (if in the (SETUP 2) menu, in the
*TAPE@IN@MODE@@@@@STOP		turn off the buzzer (if in the (SETUP 2) menu, in the
*TAPE@END@MODE@@@@REW		BUZZER section TAPE END is set to “Y”) and the
*TAPE@END@OUT@@@@@-3M		BUZZER section TAPE END is set to “Y”) and the
*CLOG@DETECT.@@@@@Y		“OFF” display, press the STOP, EJECT, FF, REW or
*SERIES@REC@IN@@@@N		“OFF” display, press the STOP, EJECT, FF, REW or
2 Press] thebutton,“TAPEuntilEND MODE”the		PLAY button.
2 Press] thebutton,“TAPEuntilEND MODE”the		• Ιφ“AL” is displayed on the digital display and the “TAPE
setting is flashing.		• Ιφ“AL” is displayed on the digital display and the “TAPE
3 Pressl the(orj) button“R 1”toor “Rset2”.		END MODE” setting is R1, autorepeat recording is not
3 Pressl the(orj) button“R 1”toor “Rset2”.	to possible.
(Please refer to page 22, “Setting the Mode at the

End of the Tape.”)

4 PressPAUSE/SEARCHthe button to save the setting.

°The REPEAT indicator will light.

5PressREC/PLAYthe SPEED CHANGE button to set the recording speed mode.

6PressRECthebutton.

°Recording will start. When the tape end is reached, the VCR will rewind it to the beginning, and recording will resume.

°When the end of the tape is reached, a buzzer will be heard (if in the (SETUP 2) menu, in the BUZZER section TAPE END is set to “Y”) and “OFF” will be displayed until the rewinding operation starts.

English