Sanyo VHR-H690 instruction manual Setting a VCR Plus+ Programming System Recording

SC4H/CA3 (VHR-H690 GB) Tue. Mar. 14/2000

VCR Plus+® PROGRAMMING SYSTEM

You can easily program a timer recording by entering the PlusCode® programming number (3 to 8 digits) published in your TV Guide®, CATV guide or local newspaper.

On any occasion, you can preset a maximum of 8 programs to be recorded during the next 1-year period, including the ones programmed by normal timer recording. See “PROGRAM TIMER RECORDING” on page 35.

You can also set any of the 8 time slots to repeatedly record the same channel at the same time daily (Monday through Friday) or weekly. Daily and weekly settings are retained in the timer memory and will continue to cue the VCR to record as long as tape is available.

During timer programming, you may want to take advantage of convenient features that give you the option of saving the title/type of program being recorded (Rec. List Super, page

27)and having the VCR automatically set the proper tape speed (Smart Speed Record Function, page 26).

NOTE: The clock time must be set before a VCR Plus+ programming system recording can be programmed.

Setting a VCR Plus+ Programming System Recording

1Follow the “Before starting” steps, under “RECORDING” on page 25.

2Press the VCR Plus+ button.

The VCR Plus+ TIMER SETTING menu (PlusCode number) appears.

@@@@@PlusCode@number

@@@@@@@@---------

3Press the number buttons (0 – 9) to enter the desired PlusCode number.

œEXAMPLE: To enter PlusCode number 4930 to program a recording, at the SLP recording speed.

œPress 4 – 9 – 3 – 0

NOTE: If you enter the wrong number by mistake, press the < button to cancel, then enter the correct number.

4Press the OK button.

The recording date, start time, end time, channel and recording tape speed appear.

@@@@@PlusCode@number

@@@@@@@@4930-----

@Ch@@Date@@Start@@End

@01@3/26Mo@8:00»@8:30»SP

5Check the channel number displayed on the screen.

For the channel numbers that appear highlighted (gray background instead of green), continue the programming until step F, and the channel will be memorized. Once a channel has been memorized, its number will not be highlighted.

If the channel number displayed is incorrect, press the < button to erase the wrong number. Press the number buttons to enter the correct channel number.

NOTE: Enter the channel number you normally select when using your cable converter/decoder (if you subscribe to a cable TV service), or the channel number you select on the TV (if you do not subscribe to a cable TV service).

6To change the recording tape speed, press the SP/SLP button.

For automatic speed selection, select “SS” for tape speed. (See Smart Speed Record Function on page 26.)

7Press the > button to select the timer recording mode, if necessary.

Timer Recording Modes

Daily (M-F):Records a program at the same time, Monday through Friday.

Weekly (WK): Records a program on the same day and time each week.

8Press the ù (or û) button to change the recording end time, if necessary.

10 minutes are subtracted from or added to the end time.

9Press the TYPE button repeatedly to select the desired program type for Rec. List super. (See “Entering the Program Type” on page 28.)

Type and the selected type name will be indicated instead of End and the end time.

FWhen finished, press the OK button to save the settings.

The VCR Plus+ TIMER SETTING menu (PlusCode number) appears.

GPress the VCR Plus+ button.

The VCR power turns off and the timer is set to the recording standby mode.

The Timer icon (n) appears.

33