L8MAP_MAQ_US_XE_JP(GB_FE_ES_DE_CS_JP).book 2 ページ ２００９年７月７日 火曜日 午後４時５７分
Precautions
■Use only the power source specified on the unit.
■When not using this unit for a long period of time, or when cleaning it, be sure to disconnect the power plug from the AC outlet.
■Do not allow anything to rest on the power cord. And do not place this unit where people will tread on the cord. Do not overload wall outlets or power cords as this can result in a fire or electric shock.
■Avoid using this unit under the following conditions:
-in extremely hot, cold or humid places,
-in dusty places,
-near appliances generating strong magnetic fields,
-in places subject to direct sunlight,
-in badly ventilated places,
-in automobiles with doors closed.
■Do not cover the ventilation slots while in operation as this could obstruct the required ventilation flow.
■When dust accumulates on the screen surface, clean it with a soft cloth.
■Unplug this unit from the AC outlet and refer servicing to qualified service personnel under the following conditions:
-when the power cord is frayed or the plug is damaged,
-if liquid has been spilled into the unit,
-if the unit has been dropped or the cabinet has been damaged,
-when the unit exhibits a distinct change in performance.
■Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Always refer servicing to qualified service personnel.
■Do not operate this unit with condensation formed. An operation under dew condensation conditions may cause the unit to malfunction. When the unit is subject to rapid temperature change, just leave the unit turned off and wait until the condensation goes off from the body (for about two hours) before you turn it on.
Condensation does not form while the unit is powered.
Contents |
|
Names of Controls/Parts | 3 |
Front View | 3 |
Rear View | 3 |
Remote Controller | 4 |
Connection Instructions | 5 |
Angles | 5 |
Instructions for Use | 6 |
Power On/Off | 6 |
System ID | 6 |
Basic Operations on the | 6 |
Monitoring Display Adjustment | 7 |
Picture Menu | 7 |
Sound Menu | 7 |
Setup Menu | 8 |
Input Menu | 8 |
Specifications ................................................... 9 | |||
Troubleshooting ............................................... 9 | |||
Accessaries |
| ||
POWER |
|
|
|
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 |
|
ID RESET |
| SYSTEM ID |
|
| 0 |
|
|
VOLUME | PIP |
| |
MUTE |
| P.MODE | Power Cord |
VOLUME | FREEZE | ||
|
|
| |
| ENTER |
| |
Remote Controller | VGA Signal Cable | ||
LCD Display
■WARNING
Never put the liquid crystals in your mouth.
If the LCD panel breaks and the liquid inside leaks out, do not let the liquid come into contact with your mouth and do not swallow it. This could cause poisoning. In the event that it contacts your mouth or eyes, wash immediately with water and consult a physician. If it contacts your hands or clothing, wipe it off with alcohol etc., and wash it away with water.
■CAUTIONS
•The LCD panel is manufactured using highprecision technology, but black spots may sometimes appear on the display, or red, blue or green spots may remain lit at all times.
In addition, the display brightness may look uneven depending on the viewing angle.
This is a feature of LCDs and is not the sign of a malfunction.
•When used in a cold location, the screen will initially appear darker than normal. As the unit internal temperature rises, the brightness will return to normal.
English 2
