L8MAP_MAQ_US_XE_JP(GB_FE_ES_DE_CS_JP).book 6 ページ ２００９年７月７日 火曜日 午後４時５７分
Instructions for Use
Power On/Off
1Switch the POWER button on.
•There will be a few seconds delay before the display appears.
•If no signal is being received in VGA mode, the power indicator will flash.
POWER
2When viewing is finished, press the POWER button.
System ID
The System ID can be set for each monitor.
Ensure that the System ID matches the remote controller ID (Remote ID).
1 2 3
1
(Factory default) System ID/Remote ID : 1 | 2 POWER |
|
1Setting the unit System ID.
Press MENU button on the unit; use the cursor button to select the "System ID" setting from the Setup menu, and then select an ID No. Close the menu screen.
2Setting the Remote ID
While holding down the SYSTEM ID button, set the same number as the System ID number by pressing the corresponding Number button
•Press the ID RESET button to return the remote controller ID to the factory default "1".
•Press the SYSTEM ID button to confirm the current System ID and Remote ID.
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
ID RESET |
| SYSTEM ID |
| 0 |
|
Basic Operations on the
To display / exit the main menu
Main Menu
Picture
Mode |
| : Dynamic |
| X | ||
Contrast |
|
|
|
|
| 100 |
|
|
|
|
| ||
Brightness |
|
|
|
|
| 45 |
|
|
|
|
| ||
|
|
|
|
| ||
Sharpness |
|
|
|
|
| 50 |
|
|
|
|
| ||
|
|
|
|
| ||
Color |
|
|
|
|
| 55 |
|
|
|
|
| ||
|
|
|
|
| ||
Tint | G 50 |
|
| R 50 | ||
|
| |||||
Color Tone |
| : Normal |
| X | ||
Backlight | : 10 |
|
| X | ||
TMore
Move | Enter | Return |
A
To return to the previous 
ENTER
Button Operation Guide
B
C
B
To select the menu |
| To decide the menu |
| ||
|
|
| Picture |
|
|
| |
Picture | Mode | : Dynamic |
| X | ||
Contrast |
|
|
| 100 | ||
| Brightness |
|
|
| 45 | |
Sound | Sharpness |
|
|
| 50 | |
Color |
|
|
| 55 | ||
|
|
|
| |||
| Tint | G 50 |
| R | 50 | |
Setup | Color Tone | : Normal |
|
| X | |
| Backlight | : 10 |
|
| X | |
Input | TMore |
|
|
|
| |
Move | Enter | Return | ||||
| ||||||
| Picture |
|
|
Mode | : Dynamic | X | |
Contrast |
|
| 100 |
Brightness |
|
| 45 |
Sharpness |
|
| 50 |
Color |
|
| 55 |
Tint | G 50 | R | 50 |
Color Tone | : Normal |
| X |
Backlight | : 10 |
| X |
TMore |
|
|
|
Move | Enter | Return | |
■How to Configure Setting Using Adjustment Bar
Note:
The OSD display will be disapear after 2 minutes if there is no button input.
ENTER |
| ENTER |
S |
|
|
Contrast |
| 100 |
T |
|
|
Move | Adjust | Return |
ENTER
Button Operation Guide
English 6
