Sanyo Specifications, Troubleshooting, Model VMC-L2617/L2617P VMC-L2619/L2619P

L8MAP_MAQ_US_XE_JP(GB_FE_ES_DE_CS_JP).book 9 ページ ２００９年７月７日 火曜日 午後４時５７分

Specifications

Model		VMC-L2617/L2617P		VMC-L2619/L2619P
Display type		SXGA a-Si	TFT LCD
Color system		NTSC/PAL (Automatic detection)
LCD display		17" active matrix		19" active matrix
		TFT LCD panel		TFT LCD panel
Viewable size (H x V)		338 x 270 mm/13.3 x 10.6 in. (4:3)		376 x 301 mm/14.8 x 11.9 in. (4:3)
Pixel pitch (H x V)		0.264 x 0.264 mm/0.01 x 0.01 in.		0.294 x 0.294 mm/0.012 x 0.012 in.
Horizontal resolution		1280 x 1024, NTSC: 600 PAL: 620 TV lines (Y/C input mode)
Viewing angle degree		Left/Right/Up/Down: 80°
Scanning frequency		Horizontal: 30 kHz – 81 kHz, Vertical: 56 Hz – 75 Hz
Contrast ratio		1000:1
Brightness		300 cd/m2 / 359 cd/yd2
Response time Tr/Tf		1.3/3.7 m/sec
Display color		16.7 M
Display monitor timing		VESA compatible (VGA mode)
Display mode		Video A, Video B, S-Video, VGA
Input connector
	Video signal (BNC IN)	2 x Composite sync signal, 1.0 V(p-p), 75 Ω BNC connector
	S-Video signal (Y/C IN)	Separate Y/C signal, mini-DIN connector
		Y signal: 1.0 V(p-p), 75 Ω negative sync
		C signal: 0.286 V(p-p), 75		Ω negative sync
	Audio signal (AUDIO IN)	2 x –6.0 dBs (400 mVrms), 2W (1W+1W) stereo, RCA pin
	VGA signal (VGA IN)	VGA Monitor Connector (15-pin)
		Red signal, Green signal, Blue signal: 0.7 V(p-p), 75 Ω positive sync
Output connector
	Video signal (BNC OUT)	2 x Composite sync signal, 1.0 V(p-p), 75 Ω BNC connector
	S-Video signal (Y/C OUT)	Separate Y/C signal, mini-DIN connector
		Y signal: 1.0 V(p-p), 75 Ω negative sync
		C signal: 0.286 V(p-p), 75		Ω negative sync
Menu language		English/Chinese/French/German/Spanish/Italian/Portuguese/Dutch/Swedish/Russian/
		Korean/Japanese
Power input		AC100 – 240 V
Operating condition		Temperature: 0°C – +40°C/32°F – 104°F
		Humidity: 10% – 90% (non-condensation)
Storage condition		Temperature: –20°C – +45°C/–4°F – +113°F
		Humidity: 5% – 95%
Power consumption		Approx. 42 W (0.7 A)
(Consumption current)
Weight		Approx. 6.0 kg/13.2 lbs.		Approx. 6.9 kg/15.2 lbs.

Features and specifi cations are subject to change without prior notice or obligations.

Troubleshooting

Before requesting service or repair, perform a check as described in the following section. If this does not work, return the unit to the place of purchase or authorized repair agent to undergo adjustment.

Problem		Points to check
No image is displayed.	•	Is the connected device outputting a video signal?
	•	Is the connection correct? (Page 5)
	•	Using the Input Menu and SOURCE button, is the correct source selected? (Page 8)
No sound is heard.	•	Is the connected device outputting an audio signal?
	•	Is the connection correct? (Page 5)
	•	Check the volume level is not set to 0. (Page 4)
The display is dark.	•	Are the brightness and contrast set to the correct level? (Page 7)
There is a hissing noise.	•	Effects of this type may be caused by temperature changes in the room but do not indicate
		a fault.
The remote controller cannot be	•	Turn the remote controller toward the IR sensor of the monitor.
operated.		(Within 30° horizontally to the left and right of the IR sensor) (Page 4)
	•	Operate the remote controller within 7 m of the IR sensor. (Page 4)
	•	Remove or avoid any obstacles when using the remote controller.
	•	The battery is spent and should be replaced.
	•	Install the battery correctly and make sure the polarity (+, -) is correct.
	•	Check that the Remote ID matches the System ID. (Page 6)

9 English