Computer Input
Input Source Selection (Computer 2: RGB)
Direct Operation
Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Top Control
INPUT button 
Computer 1
Computer 2
HDMI
Video
Network
Remote Control
COMPUTER button
Computer 1
Computer 2
COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
1 | Press the MENU button to display the | Input Menu |
| Menu. Use the Point ▲▼ buttons to select Input and |
|
| then press the Point ► or the SELECT button. |
|
2 | Use the Point ▲▼ buttons to select Computer 2 and |
|
| then press the SELECT button. |
|
3 | When Computer 2 is selected, analog RGB input |
|
| source will be selected directly. |
|
Note:
When the Input Search function is set to On1 or On2, the input signal will be searched automatically (p.48).
31
