Sanyo WXU700A Video Input Video System Selection, Video or S-video, Component, Auto, Note

Video Input

Video System Selection

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Video , S-video
	or Computer 1(Component) and then press the
	SELECT button.
3	Use the Point ▲▼ buttons to select System and then
	press the Point ► or SELECT button. Use the Point ▲

▼ buttons to select the desired system and then press SELECT button.

Video or S-video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-Mor PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4..43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4..43, PAL-Mand PAL-N.

AV System Menu (Video or S-video)

HDMI
Video
S-video
Network	Wired 1

Video

Component

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.

Note:

The AV System Menu cannot be selected when selecting RGB (Scart).

AV System Menu (Component)

Component

42