Sanyo WXU700A Maintenance and Cleaning Attaching the Lens Cap, Cleaning the Projection Lens

Maintenance and Cleaning

Attaching the Lens Cap

When moving the projector or while it is not in use, replace the lens cap.

1	Thread the string through the hole on the lens cap and
	then tie a knot in the string to secure it in place.
2	To pass the other end of the string into the hole on the
	top of the projector and pull at it.

Cleaning the Projection Lens

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner or use a lens cleaning paper or commercially available air blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the surface of the lens.

Cleaning the Projector Cabinet

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the surface of the cabinet.

When the projector is not in use, put the projector in an appropriate carrying case to protect it from dust and scratches.

Lens Cap

String for the lens cap Hole Secure it to the hole

with a screw.

66