Sanyo WXU700A owner manual Screen Size Adjustment, Screen Menu, Normal, True, Full

Computer Input

Store

To store the adjusted data, select Store and press the Point

►or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button.

A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image (1–4)in the Image Mode Selection on page 36.

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Screen and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons select the desired item and
	then press the SELECT button .

Normal

Provide the image to fit the screen size.

True

Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector enters to the panning mode automatically. Use the Point ▲▼◄►buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.

Full

Provide the full screen image.

Note:

A confirmation box appears and then select Yes.

Screen Menu

•The Screen Menu, except for Normal and Custom, cannot be operated when 720p(HDTV), 1035i (HDTV) or 1080i (HDTV) is selected in the PC System Menu (p.32).

•This projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector.

•The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.

•True, Full and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PC System Menu (p.32).

38