Sanyo WXU700A Video Input, Input Source Selection Video, S-video, Direct Operation, Top Control

Video Input

Input Source Selection (Video, S-video)

Direct Operation

Choose Video or S-videoby pressing the INPUT button on the top control or the VIDEO button on the remote control.

Remote Control

VIDEO button

Video

S-video

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select either Video or
	S-videoand then press the SELECT button.

	When video input signal is connected to the
Video
	VIDEO jack, select Video.
	When video input signal is connected to the S-
S-video
	VIDEO jack, select S-video.

Note:

•Network is for the Network function. See the owner’s manual of “Network Set-up and Operation” .

•When the Input Search function is set to On1 or On2 in the Auto setup function, the input signal will be searched automatically (p.48).

Top Control	INPUT button
	Computer 1
	Computer 2 
	HDMI
	Video
	S-video
	Network

COMPUTER 2 can not be selected when using the COMPUTER IN 2/MONITOR OUT terminal as MONITOR OUT output.

Input Menu

Video

40