Sanyo WXU700A owner manual No Show button, Timer button, Image button, Screen button

Basic Operation

NO SHOW button

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as User in the Logo selection (see page 50), the screen changes each time you press the NO SHOW button as follows.

black out → the captured image → normal → • • • • •

No show disappears after 4 seconds.

P-TIMER button

Press the P-TIMER button on the remote control. The P-Timer display 00:00 appears on the screen and the countdown starts (00:00–59:59).

To stop the countdown, press the P-TIMER button. To cancel P-Timer display the P-Timer function, press the P-TIMER button again.

IMAGE button

Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 36, 43 for details.

NO SHOW button

P-TIMER button

SCREEN button

Select the screen size (See pages 38-39, 46 for details).

IMAGE button

SCREEN button

Note:

See the previous page for the description of other buttons.

29