Sanyo WXU700A owner manual Basic Operation Menu Bar

Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 73-74.

Main Menu Sub-Menu





















Input

Used to select an input source from Computer 1, Computer 2, HDMI, Video, S-videoor Network (pp.30-31,40-41).

PC adjust

Select Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust the parameters to match with the PC input signal format (p.32-35).

Image select

For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), Colorboard and image 1 - 4 (p.36).

For HDMI or Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) , Colorboard and Image 1- 4 (p.43).

Image adjust

For computer source, used to adjust computer image [Contrast, Brightness, Color temp.., White balance (R/G/B), Sharpness and Gamma] (pp.37-38).

For HDMI or Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp.., White balance (R/G/B), Sharpness, Gamma, Noise reduction and Progressive] (pp.44-45).

Screen

For computer source, used to adjust size of the image [ Normal, True, Full, Custom and Digital zoom +/–] (pp.38-39). For HDMI or Video source, used to set size of image [Normal, Full, Zoom, Wide , Natural wide and Custom] (p.46).

Sound

Used to adjust the volume or mute the sound (p.27).

Setting

Used to set the projector’s operating configurations (pp.47-62).

Information

Display the input source information: Input , H-sync freq.., V-sync freq.., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock and Remote control (p.63).

Network

See the owner’s manual of “Network Set-up and Operation”.

Guide

The key operation is displayed.

25